Filter
Top Products
2 - 20
SPEC
TIGHTENING TORQUES
NOTE:
1. First, tighten the bolt to approximately 20 Nm (2.0 m • kg, 14 ft • lb) with a torque wrench.
2. Retighten the bolt to 20 Nm (2.0 m • kg, 14 ft • lb), and tighten another 41 ~ 46° with a angle
gauge or 32 Nm (3.2 m • kg, 23 ft • lb) with a torque wrench.
EXUP servo motor cover Screw M5 2 2 0.2 1.4
Intake air temperature sensor — M12 1 18 1.8 13
Cylinder identification sensor Bolt M6 1 10 1.0 7.2
LT
Atmospheric pressure sensor Screw M5 2 7 0.7 5.1
Speed sensor Bolt M6 1 10 1.0 7.2
Stator coil clamp Bolt M6 1 10 1.0 7.2
LT
Crankcase tightening sequence:
Item Fastener
Thread
size
Q’ty
Tightening
torque
Remarks
Nm m·kg ft·lb