Filter
Top Products
4 - 49
CHAS
FRONT FORK
NOTE:
@
Use the side of the rod holder that is marked
“B”.
c. Loosen the nut.
d. Remove the cap bolt.
e. Remove the rod holder and fork spring com-
pressor.
WARNING
_
The fork spring is compressed.
f. Remove the spacer and nut.
▲▲▲▲ ▲ ▲▲▲▲▲▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
Fork spring compressor
YM-01441
Rod holder
YM-01434
2. Remove:
• dust seal
• oil seal clip
1
• oil seal
• washer
(with a flat-head screwdriver)
CAUTION:
@
Do not scratch the inner tube.
3. Remove:
• damper rod assembly bolt
NOTE:
@
While holding the damper rod assembly with
the damper rod holder
1
, loosen the damper
rod assembly bolt.
Damper rod holder
YM-1423