Filter
Top Products
2 - 3
SPEC
ENGINE SPECIFICATIONS
Oil filter
Oil filter type Cartridge (paper) ----
Bypass valve opening pressure 80 ~ 120 kPa
(0.8 ~ 1.2 kg/cm
2
, 11.6 ~ 17.4 psi)
----
Oil pump
Oil pump type Trochoid ----
Inner-rotor-to-outer-rotor-tip
clearance
0.01 ~ 0.10 mm (0.0004 ~ 0.0039 in) 0.18 mm
(0.0071 in)
Outer-rotor-to-oil-pump-housing
clearance
0.09 ~ 0.15 mm (0.0035 ~ 0.0059 in) 0.22 mm
(0.0087 in)
Cooling system
Radiator capacity 2.45 L (2.16 Imp qt, 2.59 US qt) ----
Radiator cap opening pressure 95 ~ 125 kPa
(0.95 ~ 1.25 kg/cm
2
, 13.8 ~ 18.1 psi)
----
Radiator core
Width 340 mm (13.4 in) ----
Height 295.8 mm (11.6 in) ----
Depth 27 mm (1.06 in) ----
Coolant reservoir
Capacity 0.24 L (0.21 Imp qt, 0.25 US qt) ----
Water pump
Water pump type Single suction centrifugal pump ----
Reduction ratio 68/43 × 28/28 (1.581) ----
Max. impeller shaft tilt ---- 0.15 mm
(0.0059 in)
Starting system type
Electric starter ----
Electric fuel injection
Type INP-731/4 ----
Manufacturer NIPPON INJECTOR ----
Spark plugs
Model (manufacturer) × quantity CR9EIA 9/IU24D (NGK/DENSO) × 4 ----
Spark plug gap 0.8 ~ 0.9 mm (0.032 ~ 0.035 in) ----
Cylinder head
Volume 13.45 ~ 14.05 cm
3
(0.82 ~ 0.86 cu.in) ----
Max. warpage ---- 0.1 mm
(0.0039 in)
Item Standard Limit