Filter
Top Products
5 - 38
ENG
PICKUP COIL
REMOVING THE PICKUP COIL ROTOR
1. Remove:
• clutch cable holder 1
• pickup coil lead holder 2
• pickup coil rotor cover 3
NOTE:
@
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern.
After all of the bolts are fully loosened, remove
them.
2. Remove:
• pickup coil rotor bolt 1
• washer
• pickup coil rotor 2
NOTE:
@
While holding the generator rotor 3 with the
rotor holding tool 4, loosen the pickup coil
rotor bolt.
Rotor holding tool
YU-01235
INSTALLING THE PICKUP COIL ROTOR
1. Install:
• pickup coil rotor 1
• washer
• pickup coil rotor bolt
NOTE:
@
When installing the pickup coil rotor, align the
pin 2 in the crankshaft sprocket with the
groove a in the pickup coil rotor.