Filter
Top Products
2 - 22
SPEC
TIGHTENING TORQUES
NOTE:
1.First, tighten the ring nut to approximately 50 Nm (5.0 m • kg, 36 ft • lb) with a torque wrench, then
loosen the ring nut completely.
2.Retighten the lower ring nut to specification.
Coolant reservoir and radiator M6 5 0.5 3.6
Tail cowling and frame M5 4 0.4 2.9
Battery box and frame M6 7 0.7 5.1
Taillight and battery box M5 3 0.3 2.2
ECU and battery box M6 1 0.1 0.7
Passenger seat lock and battery box M6 3 0.3 2.2
Atmospheric pressure sensor and battery box M5 0.7 0.07 0.5
Lean angle cut-off switch sensor and battery box M4 2 0.2 1.4
Rider footrest bracket and frame M8 28 2.8 20
Passenger footrest bracket and frame M8 28 2.8 20
Rear master cylinder M6 18 1.8 13
Rear brake hose union bolts M10 30 3.0 22
Sidestand M10 63 6.3 46
Front wheel axle and bolt M14 90 9.0 65
Rear wheel axle nut M24 150 15.0 108
Front brake caliper and front fork M10 40 4.0 29
Brake disc and wheel M6 18 1.8 13
Rear wheel sprocket and rear wheel drive hub M10 100 10 72
Brake caliper and bleed screw M8 6 0.6 4.3
Pinch bolt (front wheel axle) M8 18 1.8 13
Item
Thread
size
Tightening
Remarks
Nm m·kg ft·lb