Yamaha YZF-R1PC Utility Trailer User Manual


 
6 - 15
COOL
WATER PUMP
EAS00475
ASSEMBLING THE WATER PUMP
1. Install:
oil seal
1
(into the water pump housing
2
)
NOTE:
_
Before installing the oil seal, apply tap water
or coolant onto its out surface.
Install the oil seal with a socket that matches
its outside diameter.
2. Install:
water pump seal
1
CAUTION:
_
Never lubricate the water pump seal sur-
face with oil or grease.
NOTE:
_
Install the water pump seal with the special
tools.
Before installing the water pump seal, apply
Yamaha bond No.1215 or Quick Gasket
2
to the water pump housing
3
.
È
Push down.
Mechanical seal installer
4
YM-33221
Middle driven shaft bearing driver
5
YM-4058-1
Quick Gasket
®
ACC-11001-05-01
New
New
3. Install:
rubber damper
1
rubber damper holder
2
NOTE:
_
Before installing the rubber damper, apply tap
water or coolant onto its outer surface.
New
New