Filter
Top Products
7 - 40
FI
AIR INDUCTION SYSTEM
5. Check
• Al system solenoid
▼▼▼▼ ▼ ▼▼▼▼▼▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Remove the AI system solenoid coupler
from the wire harness.
b. Connect the pocket tester (Ω × 1) to the AI
system solenoid terminal as shown.
c. Measure the AI system solenoid resistance.
d. Out of specification → Replace.
▲▲▲▲ ▲ ▲▲▲▲▲▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
Tester positive probe
→
orange
1
Tester negative probe
→
green
2
Al system solenoid resistance
18 ~ 22
Ω
at 20 °C (68 °F)