Filter
Top Products
4 - 53
CHAS
FRONT FORK
8. Install:
• rod puller 1
(onto the damper rod 2)
Rod puller
YM-01437
9. Fill:
• front fork leg
(with the specified amount of the recom-
mended fork oil)
NOTE:
_
• While filling the front fork leg, keep it upright.
• After filling, slowly pump the front fork leg up
and down to distribute the fork oil.
10.Install:
• nut 1
• fork spring 2
• spring seat 3
• spacer 4
• damper adjusting rod 5
• cap bolt 6
▼▼▼▼ ▼ ▼▼▼▼▼▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Remove the rod puller and adapter.
b. Install the nut.
c. Install the fork spring, spring seat, and
spacer.
NOTE:
_
Install the spring with the smaller pitch a fac-
ing up È.
Quantity (each front fork leg)
0.543 L
(0.478 Imp qt, 0.574 US qt)
Recommended oil
Suspension oil “01” or equiva-
lent
Front fork leg oil level (from the
top of the inner tube, with the
inner tube fully compressed and
without the fork spring)
88 mm (3.46 in)