Filter
Top Products
8 - 16
– +
ELEC
EAS00759
EAS00761
EAS00749
EAS00750
EAS00751
4. Starting circuit cut-off relay
• Disconnect the starting circuit cut-off relay
coupler from the wire harness.
• Connect the pocket tester (
Ω
×
1) and bat-
tery (12 V) to the starting circuit cut-off
relay coupler as shown.
Positive battery terminal
→
red/black
1
Negative battery terminal
→
black/yellow
2
Positive tester probe
→
blue/white
3
Negative tester probe
→
blue/white
4
• Does the starting circuit cut-off relay have
continuity between black and blue/white?
YES
NO
Replace the starting
circuit cut-off relay.
5. Starter relay
• Disconnect the starter relay coupler from
the coupler.
• Connect the pocket tester (
Ω
×
1) and bat-
tery (12 V) to the starter relay coupler as
shown.
Positive battery terminal
→
red/white
1
Negative battery terminal
→
blue/white
2
Positive tester probe
→
red
3
Negative tester probe
→
black
4
• Does the starter relay have continuity
between red and black?
YES
NO
Replace the starter
relay.
6. Main switch
• Check the main switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the main switch OK?
YES
NO
Replace the main
switch.
7. Engine stop switch
• Check the engine stop switch for continu-
ity.
Refer to “CHECKING THE SWITCHES”.
• Is the engine stop switch OK?
YES
NO
Replace the right
handlebar switch.
8. Neutral switch
• Check the neutral switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the neutral switch OK?
YES
NO
Replace the neutral
switch.
ELECTRIC STARTING SYSTEM