Filter
Top Products
4 - 7
CHAS
FRONT WHEEL AND BRAKE DISCS
8. Tighten wheel axle pinch bolt 1, and then
pinch bolt 2 to the specified torque.
9. Tap the outer side of the right fork leg with a
rubber mallet to align it with the end of the
wheel axle.
10.Tighten wheel axle pinch bolt 3, and then
pinch bolt 4 to the specified torque.
11.While applying the front brake, push down
hard on the handlebar several times to
check for proper fork operation.
T
R
.
.
Wheel axle pinch bolt
18 Nm (1.8 m · kg, 13 ft · lb)
T
R
.
.
Wheel axle pinch bolt
18 Nm (1.8 m · kg, 13 ft · lb)
EAS00549
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
_
• After replacing the tire, wheel or both, the
front wheel static balance should be
adjusted.
• Adjust the front wheel static balance with the
brake discs installed.
1. Remove:
• balancing weight(s)
2. Find:
• front wheel’s heavy spot
NOTE:
_
Place the front wheel on a suitable balancing
stand.