Filter
Top Products
5 - 48
ENG
CLUTCH
5. Install:
• friction plates
• clutch plates
NOTE:
_
First, install a friction plate and then alternate
between a clutch plate and a friction plate.
6. Install:
• pressure plate 1
• clutch spring plate seat 2
• clutch spring plate 3
• clutch spring plate retainer 4
NOTE:
Tighten the clutch spring plate retainer bolts in
stages and in a crisscross pattern.
7. Install:
• pull lever
NOTE:
_
Install the pull lever with the “”
mark facing
towards the clutch cover.
T
R
.
.
8 Nm (0.8 m · kg, 5.8 ft · lb)
8. Install:
• clutch cover
NOTE:
_
• When installing the clutch cover, push the
pull lever and check that the punch mark a
on the pull lever aligns with the mark b on
the clutch cover. Make sure that the pull rod
teeth and pull lever shaft pinion gear are
engaged.
• Tighten the clutch cover bolts in stages and
in a crisscross pattern.
T
R
.
.
12 Nm (1.2 m · kg, 8.7 ft · lb)