Yamaha YZF-R1PC Utility Trailer User Manual


 
5 - 24
ENG
VALVES AND VALVE SPRINGS
EAS00237
REMOVING THE VALVES
The following procedure applies to all of the
valves and related components.
NOTE:
_
Before removing the internal parts of the cylin-
der head (e.g., valves, valve springs, valve
seats), make sure the valves properly seal.
1. Remove:
valve lifter
1
valve pad
2
NOTE:
_
Make a note of the position of each valve lifter
and valve pad so that they can be reinstalled in
their original place.
2. Check:
valve sealing
Leakage at the valve seat
Check the
valve face, valve seat, and valve seat width.
Refer to “CHECKING THE VALVE SEATS”.
▼▼▼ ▼▼▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼
a. Pour a clean solvent
a
into the intake and
exhaust ports.
b. Check that the valves properly seal.
NOTE:
_
There should be no leakage at the valve seat
1
.
▲▲▲ ▲▲▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲
3. Remove:
valve cotters
1
NOTE:
_
Remove the valve cotters by compressing the
valve spring with the valve spring compressor
2
and the valve spring compressor attach-
ment
3
.
Valve spring compressor
YM-04019
Valve spring compressor attach-
ment
Intake valve
YM-4114
Exhaust valve
YM-4108