4 - 55
CHAS
FRONT FORK
EAS00662
INSTALLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Install:
• front fork leg
Temporarily tighten the upper and lower
bracket pinch bolts.
NOTE:
_
Make sure the inner fork tube is flush with the
top of the handlebar holder.
2. Tighten:
• lower bracket pinch bolt
• cap bolt
1
• handlebar boss pinch bolt
2
• upper bracket pinch bolt
3
WARNING
_
Make sure the brake hoses are routed prop-
erly.
3. Adjust:
• spring preload
• rebound damping
• compression damping
Refer to “ADJUSTING THE FRONT FORK
LEGS” in chapter 3.
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R
.
.
13 Nm (1.3 m · kg, 9.4 ft · lb)
T
R
.
.
26 Nm (2.6 m · kg, 19 ft · lb)