2 - 42
SPEC
CABLE ROUTING
1 Ignition coil plate
2 Rubber baffle
3 Assembling point ±
4 Assembling point !
5 To wiring section ±
6 To wiring sections ±, #
7 Oil level switch lead
8 Sidestand switch lead
9 Clamp
0 EXUP servo motor lead
A Air cleaner drain hose
B AI system lead
C Fuel tank breather hose
D Fuel tank drain hose (No spe-
cial order is required.)
E Drive sprocket cover
F Radiator hose
G Oil level gauge lead
H AI system hose
I Sidestand switch lead
J Fuel return hose
K Fuel tank breather hose
L Fuel feeder hose
M Fuel tank drain hose
N Injector sub lead
O Wire harness
P To throttle body
Q To air cleaner
R To fuel tank
S Crankcase breather hose
T Assembling point ±
U Speed sensor lead
V EXUP servo motor
W EXUP servo motor lead
X To throttle body
Y Rear brake switch lead
Z AC magneto lead
È Route the wire harness and
radiator fan motor lead through
the hole of the guide-air and
fasten them.
É Wiring section !
Above rubber buffle
Under ignition coil plate