Filter
Top Products
5 - 7
ENG
ENGINE
EAS00192
INSTALLING THE ENGINE
1. Install:
• engine mounting adjust bolts
1
• rear mounting bolts
2
• self-locking nuts
3
• left front mounting bolt
4
• right front mounting bolt
5
• pinch bolt
6
NOTE:
_
• Lubricate the rear mounting bolt threads with
lithium soap base grease.
• Do not fully tighten the bolts.
NOTE:
Use the pivot shaft wrench
7
to tighten the
engine mounting adjust bolt.
2. Tighten the bolts in the following order.
Pivot shaft wrench
YM-01471
T
R
.
.
Engine mounting adjust bolt
1
7 Nm (0.7 m · kg, 5.1 ft · lb)
Self-locking nut
3
50 Nm (5.0 m · kg, 36 ft · lb)
Left front mounting bolt
4
45 Nm (4.5 m · kg, 33 ft · lb)
Right front mounting bolt
5
45 Nm (4.5 m · kg, 33 ft · lb)
Pinch bolt
6
24 Nm (2.4 m · kg, 17 ft · lb)
3. Install:
• shift arm
1
NOTE:
_
• Align the punch mark
a
in the shift shaft with
the slot in the shift arm.
• Align the bottom edge of the shift pedal with
the mark on the frame-to-swingarm bracket.
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)