Filter
Top Products
8 - 24
– +
ELEC
CHARGING SYSTEM
EAS00776
EAS00779
4. Stator coil resistance
• Remove the generator cover.
• Connect the pocket tester (
Ω
×
1) to the
stator coils as shown.
Positive tester probe
→
white
1
Negative tester probe
→
white
2
Positive tester probe
→
white
1
Negative tester probe
→
white
3
• Measure the stator coil resistances.
Stator coil resistance
0.19 ~ 0.23
Ω
at 20°C (68°F)
• Is the stator coil OK?
YES
NO
Replace the stator
coil assembly.
5. Wiring
• Check the wiring connections of the entire
charging system.
Refer to “CIRCUIT DIAGRAM”.
• Is the charging system’s wiring properly
connected and without defects?
YES
NO
Replace the rectifier/
regulator.
Properly connect or
repair the charging
system’s wiring.