Open as PDF
Chapter 2: Getting Started & Adjusting the Display 2-9
Selecting the Mode of
2. To select a different window, press either SELECT WINDOWS soft key until
the required window is highlighted. If necessary, this will toggle windows
3. To toggle windows off, press the
WINDOWS OFF ON soft key.
Figure 2-6 shows the half-screen horizontal windows (in radar mode).
Switching Control Between Radar & Chart Screens
In a combined or an integrated system, to switch control between radar and
chart, you can change the full-screen mode using the
Alternatively, when you have both radar and chart displayed in half-screen
windows the soft key
RDR CHRT lets you toggle operating control between the
radar and the chart window.
If a window is active, i.e. control of the cursor via the trackpad is available in
that window, and you switch windows off, control automatically returns to the
full-screen (upper window) mode.
➤ To change the active window, press the RDR CHRT soft key to toggle control
between the radar and chart display. The current active display is highlighted
in red on the
RDR CHRT label and the cursor appears in that window.
Returning to the Full-Screen Display
To return to the full-screen display you can turn windows off, as previously
described. Alternatively, to return to full-screen display:
➤ Press and hold the DISPLAY key for 2 seconds to return to the currently
selected full-screen (upper window) display.
TARGETS MORE¬HDG MODE
81186_2.book Page 9 Monday, December 17, 2001 8:35 AM