Filter
Top Products
Chapter 8: Installation 8-1
Introduction
Chapter 8: Installation
8.1 Introduction
This chapter provides installation instructions for the
hsb
2
series LCD
Display. Simple systems such as that in Figure 8-1 below, or integrated
systems (see Section 8.8) are explained. Details for mounting the
hsb
2
series
LCD Display and connecting the equipment are included.
• To install a single
hsb
2
series display unit follow the instructions in
Section 8.2 to Section 8.6.
If this display is a radar unit, you should then test the display as described in
Section 8.7.
• To connect your display to other equipment, follow the guidelines in
Section 8.8 and Section 8.9, taking particular care to ensure the correct
polarity of the SeaTalk supply.
• To install multiple displays, install the first display and any other equip-
ment, then test the system as described in Section 8.2 to Section 8.9. You
can then install additional displays.
• Details on installing the scanner are provided in the Pathfinder Plus
Radar Scanner Owner’s Handbook.
Figure 8-1: Typical System - Single Display Unit
NMEA
SeaTalk
Display Unit
Distribution Panel
D4288-2
Scanner
12/24V Supply
12V Supply
12V Supply
Junction
Box
GPS
Compass
81186_2.book Page 1 Monday, December 17, 2001 8:35 AM