Open as PDF
PLUS Series LCD Display
Saving the Current
Saving the Current Route
You can save up to 20 named routes in the route database list. These routes can
then be re-displayed and followed at a later date. When you save the route, all
new waypoints are saved in the Waypoint List.
Note: If the current route has not been saved, when you attempt an operation
that affects this route, e.g.
CLEAR ROUTE, you are prompted to save it.
➤ To save and name the current route:
1. To access the
SAVE ROUTE soft key, press the ROUTE soft key, followed by
2. Press the
SAVE ROUTE soft key. The save route pop-up and the NAME ROUTE
soft keys are displayed as illustrated in Figure 5-6.
3. The next available entry on the route list is highlighted.
(If required, you can use the trackpad to select another position in the list;
this can be a blank slot, or an existing route that you no longer require).
Figure 5-6: Save Route Window
4. If you do not wish to name or re-name the route, press the NO soft key to
clear the list. The route is saved and is listed as Route Not Named.
If you wish to name the route press the
YES soft key. Use the trackpadto
move the cursor right or left to the character you wish to edit. Then use the
top or bottom of the trackpad to increase or decrease the letter or number.
81186_2.book Page 22 Monday, December 17, 2001 8:35 AM