Raymarine Pathfinder Radar GPS Receiver User Manual


 
B-4
hsb
2
PLUS Series LCD Display
Raystar 112, 105,
Apelco 182 and
182XT
Raystar 112LP (SeaTalk version)
To connect your Raystar 112LP to your
hsb
2
display, refer to the first
illustration below or follow the instructions in Chapter 8.
To connect the Raystar 112LP and your Differential Beacon Receiver, cut off
the 5-pin connector and strip back the red, black and green wires. Remove the
sleeve from the end of the Raystar 112LP cable to expose the green and brown
wires, then connect to the Auxiliary Junction Box as shown in the second
illustration below.
CAUTION:
Ensure the correct polarity of the 12 V supply before applying display or
SeaTalk power. It is recommended that a multimeter is used to check the
connections.
12V
Power
Supply
(fused)
From
GPS
sensor
Yellow
Red
Screen
To Display Unit
SeaTalk Socket
D4292-3
Red
Black
12V
Power
Supply
(fused)
From
GPS
sensor
Green
Yellow
Red
Black
White
Yellow
Green
Brown
Red
Screen
To Display Unit
SeaTalk Socket
D4296-3
From
the
DBR
Red
Black
81186_2.book Page 4 Monday, December 17, 2001 8:35 AM