Raymarine Pathfinder Radar GPS Receiver User Manual


 
Chapter 5: Standard Chart Operations 5-3
Removing a Chart
Card
Figure 5-1: Removing the Chart Card
Removing a Chart Card
We recommend that before you remove a chart cartridge, you ensure the chart
is not being used on any other display unit. Removing a chart cartridge whilst
a display unit is accessing the chart may cause an operational error.
To remove a chart card:
1. Open the card cover, at the lower left of the display front panel.
2. Press on the card you wish to remove, and move the top of the card to the
left to clear the retaining pegs.
The card will spring half-way out, enabling you to grip the card and
remove it from the slot.
3. Remember to close the card cover so that it clicks shut, to prevent water
from entering the card reader assembly.
Displaying the Chart Data
The new chart information will be displayed when you move the cursor into an
area covered by the new chart or, if it is already in the area, change the range
scale.
If an
hsb
2
series repeater display is connected, the chart can also be accessed by
the repeater display. To see the chart you may need to zoom or pan, to redraw
the chart area to the screen.
D4158-1
81186_2.book Page 3 Monday, December 17, 2001 8:35 AM