Filter
Top Products
7-65
GNS-XL Flight Management System AFIS Operation
Rev. 3
Oct/02
RETURNING TO AUTO
1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line Select Key -
DEPRESS to position cur-
sor over Option 8, OPER-
ATING MODES. (Figure 7-
122)
3. ENT Key - DEPRESS.
4. Line Select Key -
DEPRESS to position cur-
sor over MAN or OFF
option of ground network
field. (Figure 7-123)
5. BACK Key - DEPRESS
until AUTO appears in the
cursor. (Figure 7-124)
6. ENT Key - DEPRESS to
select AUTO mode.
NOTE: AUTO REPORT,
AUTO WX UPDT, and OPER-
ATING MODE selection status
are stored in non-volatile memo-
ry. If the operator turns to OFF
or MAN, the operator must res-
elect to turn ON.
The ACTIVE LINK information
at the bottom of the page indi-
cates the network that is being
serviced at that time. If the
system is operating in automatic
mode and the network selected
by the present position informa-
tion is turned OFF or none are
operational, NONE will be dis-
played.
AFIS OPERATING MODES
>
>
>
AUTO REPORT ON
AUTO WX UPDT ON
ARINC OFF
SITA/AVICOM OFF
PRINTER CTRL
ACTIVE LINK: NONE
Figure 7-123
AFIS MENU
<
<
<
<
1 AFIS FLT PLAN
2 SIGMETS
3 TERMINAL WX
4 WINDS ALOFT
5 RECALL AFIS FPL
6 SEND AFIS MSG
7 DISPL AFIS MSG
8 OPERATING MODES
Figure 7-122
AFIS OPERATING MODES
>
>
>
AUTO REPORT ON
AUTO WX UPDT ON
ARINC AUTO
SITA/AVICOM OFF
PRINTER CTRL
ACTIVE LINK: ARINC
Figure 7-124