Filter
Top Products
System Operation
3-21
GNS-XL Flight Management System
Rev. 4
Nov/04
NOTE:
SELECT
will not appear as an option since a
SID
already
exists in the Flight Plan.
EDITING A SID FROM ANY STORED FPL OR THE ACTIVE FPL
PAGE
1. Line Select Key -
DEPRESS to position
cursor over the DEPART
field on the FLIGHT
PLAN Page.
2. ENT Key - DEPRESS.
3. Line Select Key adjacent
to SID field - DEPRESS
to position cursor over
the first SID identifier on
the list.
NOTE: A list will only appear
if the
TRANSITION/ RUN-
WAY
are compatible with
other
SID
s. (Figure 3-28)
4. Line Select Key adjacent
to the TRANSITION field
- DEPRESS to position
cursor over the current
TRANSITION waypoint
on the list. (Figure 3-29)
5. Line Select Key -
DEPRESS to position the
cursor over the desired
TRANSITION. (Figure 3-
30)
RUNWAY RW16L
SID ------
TRANSITION HQM
ELMAA5?
DEPARTURE KSEA 1/1
>
>
Figure 3-28
RUNWAY RW16L
SID ------
TRANSITION ------
TOU
BLUIT
CVO
HQM ?
UBG
BKE
DEPARTURE KSEA 1/1
>
>
Figure 3-29
RUNWAY RW16L
SID ------
TRANSITION ------
TOU LKV ?
BLUIT
CVO
HQM
UBG
BKE
DEPARTURE KSEA 1/1
>
>
Figure 3-30