Filter
Top Products
System Operation
3-81
GNS-XL Flight Management System
Rev. 0
Oct/96
DIRECT TO - VNAV WAYPOINT AS LATERAL WAYPOINT
This procedure enables the pilot to proceed Direct To a waypoint,
both vertically and laterally by means of a Vertical Path Descent.
If the current To waypoint is the desired VNAV Direct To waypoint, go to Step 4.
1. Line Select Key (on NAVIGATION Page 1) - DEPRESS to posi-
tion the cursor over the TO waypoint field. Type in the desired
waypoint and press ENT
or,
dd
Key - DEPRESS.
A DIRECT TO Page
appears with the cursor
over the current TO way-
point.
2. Line Select Key -
DEPRESS to position
cursor over desired way-
point. (Figure 3-132)
NOTE: Active Flight Plans containing more than 18 waypoints will
display the remaining waypoints on subsequent pages. Press
d
key again, or NXT Key, to access remaining pages.
A Random Waypoint may also be used. See DIRECT TO -
Random Waypoint.
3. ENT Key - DEPRESS. CDU screen automatically advances to
NAVIGATION Page 1.
NOTE: If an offset waypoint was selected, the system first displays
the OFFSET WPT Page. Verify data and DEPRESS ENT. The
DIRECT Page will again be displayed with the cursor over the Offset
Waypoint. Press ENT. The
display automatically
advances to NAVIGATION
Page 1.
4. Line Select Key -
DEPRESS to position
cursor over TO Waypoint
on NAVIGATION Page
1. (Figure 3-133)
DIRECT 23:03
TO BDF 05:22
DIS 1328.5
ETE 05:46.3
DTK 049
GS 228
WIND 230/ 8
-AUTO-
NAVIGATION 1/4
<
>
>
>
<
Figure 3-133
KSNA PWE
MUSEL LMN
HEMET BURKK
TRM TO BDF
EED* GSH
TBC KDTW
FMN *****
PUB
HLC
DIRECT 1/2
>
>
>
<
<
<
<
<
Figure 3-132