System Operation
3-24
GNS-XL Flight Management System
Rev. 0
Oct/96
ENTERING AN AIRWAY FROM ANY STORED FPL OR THE
ACTIVE FPL PAGE
Enroute Airways include high altitude jet routes and low altitude and
colored airways.
1. Line Select Key - DE-
PRESS to position cursor
directly below the starting
waypoint of the desired
airway on the Flight Plan
page. (Figure 3-35)
2. Airway ident - INSERT.
Use:
Option 1 if the destination
waypoint is unknown.
Option 2 to enter the
known destination way-
point.
Option 1
a. # Key - DEPRESS,
then enter the airway
identifier. (Figure 3-36)
b. ENT Key - DE-PRESS.
(Figure 3-37)
NOTE: If the waypoint above
the cursor is not a waypoint
on the selected airway, the
airway identifier will blink. The
appropriate airway or way-
point identifier must be
entered.
The Flight Plan should always
be checked for duplicate way-
points and the appropriate
waypoints deleted.
KSEA - KLAX
ELMAA
HQM
KLAX
******
DEPART
ARRIVE ETA
APPROACH ERASE
ACTIVE FPL 1/1
<
<
<
<
<
>
Figure 3-35
KSEA - KLAX
ELMAA
HQM
#J501
******
DEPART
ARRIVE ETA
APPROACH ERASE
ACTIVE FPL 1/1
<
<
<
<
<
>
Figure 3-36
RZS TO HQM ?
ZONAL HQM31
BSR TOU
PESCA FINGS
PYE ZESNB
NIECE CAFTA
COPPO YZP
OED MOCA1
SELECT ENDING WPT
AIRWAY J501 1/2
>
<
<
<
<
<
>
>
>
>
Figure 3-37