Filter
Top Products
System Operation
3-32
GNS-XL Flight Management System
Rev. 0
Oct/96
ENTERING AN APPROACH ON A STORED FPL OR THE ACTIVE
FPL PAGE
1. Line Select Key -
DEPRESS to position cur-
sor over APPROACH?
field on the ACTIVE FPL
page. (Figure 3-52)
2. ENT Key - DEPRESS to
display APPROACH
Page. (Figure 3-53)
3. APPROACH Airport
identifier - VERIFY or
INSERT valid ident.
NOTE: If there are no
APPROACHes associated
with the Approach Airport,
the message “NO
APPROACH AVAIL”
appears and the airport ident
field flashes. Depress FPL
Key to return to Active Flight
Plan.
4. Line Select Key -
DEPRESS to position
cursor over the desired
RUNWAY on the run-
way list. (Figure 3-54)
NOTE: If a CIRCLING Type
Approach is desired, use line
select to display type. Go to
step 6.
5. ENT Key - DEPRESS to
select RUNWAY. If a
valid runway has been
selected, the cursor
moves to the first
approach TYPE.
6. Line Select Key- DEPRESS to position cursor over the desired
Approach TYPE if required.
RUNWAY ------
TYPE ------
TRANSITION ------
RW17 ?
RW35
RW06
RW24
APCH KEWK 1/1
>
>
Figure 3-53
KORD - KEWK
PNT
CAP
KEWK
DEPART
ARRIVE ETA
APPROACH? ERASE
ACTIVE FPL 1/1
<
<
<
<
<
>
Figure 3-52
RUNWAY ------
TYPE ------
TRANSITION ------
RW17
RW35 ?
RW06
RW24
APCH KEWK 1/1
>
>
<
Figure 3-54