Filter
Top Products
System Operation
3-22
GNS-XL Flight Management System
Rev. 0
Oct/96
6. ENT Key - DEPRESS to
select desired TRANSI-
TION. The system will
automatically load the
compatible SID associat-
ed with the selected
TRANSITION. (Figure 3-
31)
7. ENT Key - DEPRESS to
select a new SID and
insert the new SID into
the flight plan.
NOTE: The
RUNWAY
can also be edited without changing the origi-
nal
SID
if the SID/TRANSITION are compatible. This is done by
pressing the Line Select Key adjacent to the
RUNWAY
field. Press
the Line Select Key to position the cursor over the desired
RUNWAY
.
Press
ENT
to load the desired
RUNWAY
on the
SID.
8. ENT Key - DEPRESS to select the edited SID as displayed and
insert it into the flight plan.
NOTE: Look carefully at the flight plan to see if any waypoints are
out of sequence. Delete waypoints as necessary.
ERASING A SID FROM ANY STORED FPL OR THE ACTIVE FPL
PAGE
1. Line Select Key -
DEPRESS to position
cursor over DEPART
field on the Flight Plan
Page.
2. ENT Key - DEPRESS.
3. Line Select Key -
DEPRESS to position
cursor over ERASE?
(Figure 3-32).
4. ENT Key - DEPRESS to
erase SID and return to Flight Plan page.
RUNWAY RW16L
SID SUMMA5
TRANSITION LKV
WAYPOINTS OF SID:
SUMMA
LKV
SELECT? ERASE
DEPARTURE KSEA 1/1
>
>
>
Figure 3-31
RUNWAY RW16L
SID ELMAA3
TRANSITION HQM
WAYPOINTS OF SID:
ELMAA
HQM
ERASE?
DEPARTURE KSEA 1/1
>
<
<
>
>
Figure 3-32