Filter
Top Products
System Operation
3-99
GNS-XL Flight Management System
Rev. 0
Oct/96
10. Data - CHECK. When DIRECT is displayed all data except DTK
is updated continuously.
If data is not continuously updated, it will be recalculated each time:
a. The TRIP PLAN Page is selected.
b. A TRIP PLAN is entered.
c. A leg change is made on the TRIP PLAN Page. ETE and
FPL time are recalculated whenever the groundspeed
changes.
d. Leg or GS change is made on FUEL PLAN Page.
NOTE: ETA @ the destination and RAIM @ the destination are dis-
played only when DIRECT legs are being viewed. (Figure 3-163)
If the TRIP PLAN Page is being displayed during a leg change on
the ACTIVE FLIGHT PLAN the new TO Waypoint is not displayed.
Exit and return to the TRIP PLAN Page to view the updated TO
Waypoint.
11. To review the remainder
of the Flight Plan:
Position cursor over TO
field, DEPRESS ENT
Key TWICE to call up
next leg. DEPRESS
ENT Key ONCE for
each subsequent leg.
(Ground-speed should
be updated if neces-
sary.)
NOTE: Information between
any desired waypoints can
be reviewed by selecting the
TRIP PLAN Page and enter-
ing a FROM and TO way-
point (Figure 3-162) or per-
forming the present position
direct procedures (Figure 3-
163). If the TO waypoint is
not on the selected Flight
Plan, the Flight Plan number
and origin/destination fields
will display dashes.
TRIP PLAN --
FR KLAX ----
TO KPIA ----
GS 406
DIS/DTK 1425.3/051
ETE 03:30.3
FPL 1425/03+03
>
>
<
PLAN 2/8
Figure 3-162
TRIP PLAN --
DIRECT ----
TO COS ----
GS 404
DIS/DTK 441.5/075
ETE 001:5.6
FPL 4410/01+05
ETA @KLIT 01:00
RAIM @KLIT AVAIL
>
>
<
PLAN 2/8
Figure 3-163