Filter
Top Products
System Operation
3-10
GNS-XL Flight Management System
Rev. 3
Oct/02
1. Line Select Key - DE-
PRESS to position the cur-
sor over the waypoint iden-
tifier that will follow the new
entry. (Figure 3-11)
2. Type Waypoint Identifier -
INSERT. (Figure 3-12)
3. ENT Key - DEPRESS.
4. Waypoint Coordinates -
VERIFY or INSERT.
5. ENT Key - DEPRESS.
The new waypoint is
added to the Flight Plan
sequence and the cursor
is over the waypoint fol-
lowing the new entry.
(Figure 3-13)
NOTE: Adding a waypoint to
a SID, STAR, or Approach
Procedure will invalidate that
procedure as indicated by the
waypoints no longer being
indented.
Adding Oceanic
Waypoints
Oceanic waypoints are
entered in the same manner
as other waypoints with one
exception. Instead of enter-
ing a waypoint identifier, a
five-character coordinate
identifier, such as 3050N, is entered. The following rules are to be
applied:
1. Positions in the Northern Hemisphere use letters “N” and “E”.
Positions in the Southern Hemisphere use the letters “S” and
“W”. Both will use numerics for latitude and longitude values as
follows:
a. Latitude - Latitude will always precede longitude.
KDAL - KHPN
LIT
HNN
JST
MXE
KHPN
DEPART
ARRIVE SELECT
APPROACH ERASE
FLIGHT PLAN 6 1/2
>
<
<
<
<
<
>
Figure 3-11
KDAL - KHPN
LIT
BWG
JST
MXE
KHPN
DEPART
ARRIVE SELECT
APPROACH ERASE
FLIGHT PLAN 6 1/2
>
<
<
<
<
<
>
Figure 3-12
KDAL - KHPN
LIT
BWG
HNN
JST
MXE
DEPART
ARRIVE SELECT
APPROACH ERASE
FLIGHT PLAN 6 1/2
>
<
<
<
<
<
>
Figure 3-13