Honeywell GNS-XL GPS Receiver User Manual


 
3-79
GNS-XL Flight Management System
Rev. 0
Oct/96
EDITING ALTITUDE CONSTRAINTS
The following pages allow the pilot to edit altitude constraints for way-
points on the VNAV WAYPOINT Page, VNAV pages, referred to as
VNAV FPL Pages. One of the three following options may be used:
OPTION 1: Using the VNAV Page.
OPTION 2. Using the VNAV FPL WAYPOINT Pages.
OPTION 3: Using the VNAV WAYPOINT Page.
Option 1: Using VNAV Page
1. VNAV Key - DEPRESS
to display VNAV 1/2
Page. The altitude con-
straint may be changed
on this page if the cur-
rent TO waypoint has a
constraint programmed.
Type the new altitude in
the altitude field adjacent
to the TO WPT. All
parameters associated
with the former con-
straint will remain
unchanged, i.e., FPA, A, B, G, or OFFSET. (Figure 3-129)
2. ENT Key - DEPRESS.
Option 2: Using VNAV FPL WAYPOINT Page
1. VNAV Key - DEPRESS to display the VNAV 2/2 Page.
NOTE: More VNAV Pages
will be available if the active
flight plan has several pages
of waypoints.
2. Line Select Key -
DEPRESS to position the
cursor over the desired
waypoint altitude. (Figure
3-130)
System Operation
CLIMB 8754
LAX -10 10000A
KEGGS - 2 13000A
COOP - 3 15000A
DAG
CLARR -----
LAS -----
RENTT -----
ERASE
VNAV 2/2
>
>
>
>
>
<
<
<
<
<
Figure 3-130
CLIMB 5566
TO CIVET FL350
RANGE (NM) 300.4
ETE 01:13.5
ACTUAL FPM UP 400
CLIMB GRAD 97 /NM
DATA
VNAV 1/2
>
>
>
Figure 3-129