Filter
Top Products
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-06 Rev. A82
ENGINE INDICATION SYSTEM
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
9 8
3
Figure 3-5 Engine Page (DA40F)
6
4
5
7
2
FUEL CALCULATIONS
NOTE: Fuel calculations do not use the aircraft fuel quantity indicators and are calculated from the last time
the fuel was reset.
Fuel used (GAL USED), endurance (ENDUR), and range (in nautical miles, RANGE NM) are calculated
based on the displayed fuel remaining (GAL REM) and the fuel flow totalizer. The calculated range also takes
into account the aircraft’s heading and the wind direction and speed. See the Flight Management Section for
information regarding the map feature related to the EIS Fuel Calculations.
Adjusting the fuel totalizer quantity:
On the Engine Page, use the DEC FUEL and INC FUEL softkeys to obtain the desired fuel remaining (GAL REM).
Resetting the fuel totalizer:
On the Engine Page, press the
RST FUEL
Softkey; this also resets the fuel remaining (GAL REM) to zero.
Calculated
Range
Calculated
Fuel Used
Calculated
Endurance
Set Fuel
Remaining
Figure 3-6 Fuel Calculations Group