Filter
Top Products
190-00592-06 Rev A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
405
ADDITIONAL FEATURES
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
Figure 8-1 Synthetic Vision Imagery
SVS OPERATION
SVS is activated from the PFD using the softkeys located along the bottom edge of the display. Pressing the
softkeys turns the related function on or off. When SVS is enabled, the pitch scale increments are reduced to
10 degrees up and 7.5 degrees down.
SVS functions are displayed on three levels of softkeys. The PFD Softkey leads into the PFD function Softkeys,
including synthetic vision. Pressing the
SYN VIS
Softkey displays the SVS feature softkeys. The softkeys are
labeled PATHWAY, SYN
TERR, HRZN
HDG
, and APTSIGNS. The BACK Softkey returns to the previous
level of softkeys. Synthetic Terrain must be active before any other SVS feature may be activated.
HRZN
HDG
, APTSIGNS, and PATHWAY Softkeys are only available when the SYN
TERR Softkey is
activated (gray with black characters). After activating the SYN TERR Softkey, the HRZN
HDG
, APTSIGNS,
and PATHWAY softkeys may be activated in any combination to display desired features. When system power
is cycled, the last selected state (on or off) of the SYN TERR, HRZN
HDG
, APTSIGNS, and PATHWAY
softkeys is remembered by the system.
•PATHWAY Softkey enables display of rectangular boxes that represent course guidance.
•SYN
TERR Softkey enables synthetic terrain depiction.
•HRZN
HDG
Softkey enables horizon heading marks and digits.
•APTSIGNS Softkey enables airport signposts.