Filter
Top Products
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-06 Rev. A22
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
• PFD
Displays second-level softkeys for additional PFD configuration
SYN VIS
Displays the softkeys for enabling or disabling Synthetic Vision features
PATHWAY
Displays rectangular boxes representing the horizontal and vertical flight path
of the active flight plan
SYN TERR
Enables synthetic terrain depiction
HRZN HDG
Displays compass heading along the Zero-Pitch line
APTSIGNS
Displays position markers for airports within approximately 15 nm of the
current aircraft position. Airport identifiers are displayed when the airport is
within approximately 9 nm.
DFLTS
Resets PFD to default settings, including changing units to standard
WIND
Displays softkeys to select and configure wind data
OPTN1
Displays wind data in longitudinal and lateral components
OPTN2
Displays wind data total direction and speed
OPTN3
Displays wind data total direction with head and cross-wind speed components
OFF
Removes wind information from display
DME
Displays/removes DME Information Window (optional)
BRG1
Cycles the Bearing 1 Information Window through:
NAV1: Waypoint frequency/identifier and DME information
GPS: Waypoint identifier and GPS distance information
ADF: Waypoint frequency
Off: Removes window
HSI FMT
Displays softkeys to select the HSI format
360 HSI
Displays HSI as a 360° compass rose
ARC HSI
Displays HSI as a 140° viewable arc (Bearing Information windows unavailable)
BRG2
Cycles the Bearing 2 Information Window through:
NAV2: Waypoint frequency/identifier and DME information
GPS: Waypoint identifier and GPS distance information
ADF: Waypoint frequency
Off: Removes window
ALT UNIT
Displays softkeys for changing the Altimeter barometric setting and altitude displays to
metric units
METERS
Displays the current and Selected altitudes in meters in addition to feet, when selected
IN
Displays the Altimeter barometric setting in inches of mercury (in Hg)
HPA
Displays the Altimeter barometric setting in hectopascals (hPa)
STD BARO
Sets barometric pressure to 29.92 in Hg (1013 hPa if metric display is selected)
• OBS
Selects OBS Mode on the CDI when navigating by GPS (only available with active leg)
• CDI
Cycles CDI through GPS, NAV1 (VOR/LOC), and NAV2 (VOR/LOC) navigation sources
• ADF/DME Displays/removes ADF/DME Radio Tuning Window (optional; may appear as ADF, DME,
or ADF/DME depending on installation)