Filter
Top Products
190-00592-06 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
19
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
1
NAV VOL/ID Knob
Turn to control NAV audio volume (shown in the NAV Frequency Box as a
percentage)
Press to toggle Morse code identifier audio on/off
2
NAV Frequency
Transfer Key
Transfers the standby and active NAV frequencies
3
NAV Knob
Turn to tune NAV receiver standby frequencies (large knob for MHz; small for kHz)
Press to toggle light blue tuning box between NAV1 and NAV2
4
Heading Knob
Turn to manually select a heading
Press to display a digital heading momentarily to the left of the Horizontal Situation
Indicator (HSI) and synchronize the Selected Heading to the and current heading
5
Joystick
Turn to change map range
Press to activate Map Pointer and move in desired direction to pan map
6
CRS/BARO Knob
Turn large knob for altimeter barometric pressure setting
Turn small knob to adjust course (only when HSI is in VOR or OBS Mode)
Press to re-center the CDI and return course pointer directly to bearing of active
waypoint/station
7
COM Knob
Turn to tune COM transceiver standby frequencies (large knob for MHz; small for
kHz)
Press to toggle light blue tuning box between COM1 and COM2
The selected COM (green) is controlled with the COM MIC Key (Audio Panel).
8
COM Frequency
Transfer Key
(EMERG)
Transfers the standby and active COM frequencies
Press and hold two seconds to tune the emergency frequency (121.5 MHz)
automatically into the active frequency field
9
COM VOL/SQ Knob
Turn to control COM audio volume level (shown as a percentage in the COM
Frequency Box)
Press to turn the COM automatic squelch on/off
10
Direct-to Key ( )
Activates the direct-to function and allows the user to enter a destination waypoint
and establish a direct course to the selected destination (specified by identifier,
chosen from the active route)
11
FPL Key
Displays flight plan information
12
CLR Key
(DFLT MAP)
Erases information, cancels entries, or removes menus
Press and hold to display the MFD Navigation Map Page (MFD only).
13
MENU Key
Displays a context-sensitive list of options for accessing additional features or making
setting changes
14
PROC Key
Gives access to IFR departure procedures (DPs), arrival procedures (STARs), and
approach procedures (IAPs) for a flight plan or selected airport
15
ENT Key
Validates/confirms selection or data entry