Garmin DA40 GPS Receiver User Manual


  Open as PDF
of 538
 
190-00592-06 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
501
APPENDIX B
Figure B-3 Correct Database Locations
PFD MFD
The Garmin database updates can be obtained by following the instructions detailed in the ‘Aviation Databases’
section of the Garmin website (www.garmin.com). Once the updated files have been downloaded from the
website, a PC equipped with an appropriate SD card reader is used to unpack and program the new databases
onto the existing Supplemental Data Cards. The following equipment is required to perform the update:
•Windows-compatiblePCcomputer(Windows2000orXPrecommended)
•SanDiskSDCardReader,P/NsSDDR-93orSDDR-99orequivalentcardreader
•UpdateddatabaseobtainedfromtheGarminwebsite
•Existing010-00330-42SupplementalDatabaseSDCardsfrombothPFDandMFD
In some cases it may be necessary to obtain an unlock code from Garmin in order to make the database
product functional. It may also be necessary to have the system configured by a Garmin authorized service
facility in order to use some database features.
Updating Garmin databases:
1) Copy the data to the appropriate data cards.
2) Insert one SD card in the bottom card slot of the MFD and one in the bottom card slot of each PFD. The SD card
containing the ChartView or FliteCharts database must be inserted into the bottom slot on the MFD.
 previous next