Garmin DA40 GPS Receiver User Manual


  Open as PDF
of 538
 
190-00592-06 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
33
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
SYSTEM SETTINGS
G1000 system settings are managed from the System Setup Page. The following settings can be changed:
•Date/time
•DisplayUnits
(see Flight Instruments Section)
•Airspacealerts(seeFlightManagementSection)
•Arrivalalerts(seeFlightManagementSection)
•MFDNavigationStatusBoxelds
(see Flight Management Section)
•CDIscalingforGPSnavigationsource
(see Flight Instruments Section)
•COMchannelspacing
(see Audio Panel and CNS Section)
•Criteriafordisplayingnearestairports
(see Flight Management Section)
•AudioAlerts
Restoring system setup defaults:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the DFLTS Softkey.
Or:
a) Press the MENU Key.
b) Highlight ‘Restore Defaults’ and press the ENT Key.
Figure 1-29 System Setup Page
 previous next