Filter
Top Products
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-06 Rev. A
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
480
APPENDIX A
•Audio Alerting System: The G1000 System issues audio alert tones when specific system conditions are met.
See the Alert Level Definitions Section for more information. The annunciation tone may be tested from the
AUX - System Status Page.
Testing the system annunciation tone:
1) Use the FMS Knob to select the AUX - System Status Page.
2) Select the ANN TEST Softkey.
Or:
a) Press the MENU Key.
b) Highlight ‘Enable Annunciator Test Mode’ and press the ENT Key.
Figure A-2 Annunciation Tone Testing
(AUX-System Status Page)
Press to Test Annunciation Tone
ALERT LEVEL DEFINITIONS
The G1000 Alerting System, as installed in Diamond DA40/40F aircraft, uses three alert levels.
•WARNING: This level of alert requires immediate attention.
Warning alert text is shown in red in the Annunciation Window and is accompanied by a continuous chime
and a flashing ‘WARNING’ Softkey annunciation. Pressing the WARNING Softkey acknowledges the presence
of the warning alert and stops the aural chime.
•CAUTION: This level of alert indicates the existence of abnormal conditions on the aircraft that may require
intervention.