Garmin DA40 GPS Receiver User Manual


 
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-06 Rev A442
ADDITIONAL FEATURES
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
NOTE
: A subdued softkey label indicates the function is disabled.
The ChartView time critical information can also be found on the AUX - System Status page. The database
CYCLE number, EXPIRES, and DISABLES dates of the ChartView subscription appear in either blue or yellow
text. When the ChartView EXPIRES date is reached, ChartView becomes inoperative 70 days later. This is
shown as the DISABLES date. When the DISABLES date is reached, charts are no longer available for viewing.
The
SHW CHRT
Softkey label then appears subdued and is disabled until a revised issue of ChartView is
installed.
Press the DBASE Softkey for scrolling through the database information. Scroll through the database with
the FMS knob or ENT Key.
The ChartView database cycle number shown in the figure, 0822, is deciphered as follows:
08 – Indicates the year 2008
22 – Indicates the 22nd issue of the ChartView database for the year
The EXPIRES date 15–NOV–08 is the date that this database should be replaced with the next issue.
The DISABLES date 24–JAN–09 is the date that this database becomes inoperative.
Figure 8-46 AUX – System Status Page, ChartView Current and Available
ChartView
Data
The ChartView database is provided directly from Jeppesen. Refer to Updating Jeppesen Databases in
Appendix B for instructions on revising the ChartView database.