Filter
Top Products
2-64 / Installation & Operation CI-ControlWave EFM
Manual Mode
In Manual Mode the programmer is responsible for creating each screen and displaying the
next desired screen, based on key inputs. The programmer has access to all lines of the
display and can provide any string that he/she desires to display. Special formats that must
be adhered to that allow the programmer to display what they want on the screen are
provided in the description of iaScrnSruct
in the ACCOL 3 Display function block within
ControlWave Designer’s On-Line Help. It should be noted that currently, Manual Mode
does not support reading Keypad keypresses. Note: Manual Mode operation requires
ControlWave Firmware 4.50 or newer.