Open as PDF
Programming Additional Transmitters
Refer to SENTRY KEY “Customer Key Programming.”
NOTE: If you do not have a programmed transmitter,
contact your authorized dealer for assistance.
The recommended replacement battery is CR2032 bat-
NOTE: Do not touch the battery terminals that are on
the back housing or the printed circuit board.
1. With the transmitter buttons facing down, use a small
screwdriver or similar flat object to pry the two halves of
the transmitter apart. Make sure not to damage the
rubber gasket during removal.
Separating Transmitter Halves
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25