Open as PDF
mode when any other button is pushed, the ignition is
turned OFF, or 5 minutes has passed since any button
Selecting Satellite Mode in RBB, RAH and RBK
Press the MODE button repeatedly until ЉSAЉ appears in
the display. A CD or tape may remain in the radio while
in the Satellite radio mode.
Selecting Satellite Mode in RBP, RBU, RAZ, RB1
and RBQ Radios
Press the MODE button repeatedly until the word
ЉSIRIUSЉ appears in the display. These radios will also
display the following:
After 3 seconds, the current channel name and channel
number will be displayed for 5 seconds.
The current program type and channel number will
then be displayed for 5 seconds.
The current channel number will then be displayed
until an action occurs.
A CD or tape may remain in the radio while in the
Satellite radio mode.
Selecting a Channel
Press and release the SEEK or TUNE buttons to search for
the next channel. Press the top of the button to search up
and the bottom of the button to search down. Holding the
TUNE button causes the radio to bypass channels until
the button is released.
Press and release the SCAN button (if equipped) to
automatically change channels every 7 seconds. The
radio will pause on each channel for 7 seconds before
moving on to the next channel. The word ЉSCANЉ will
appear in the display between each channel change. Press
the SCAN button a second time to stop the search.
UNDERSTANDING YOUR INSTRUMENT PANEL 235