Open as PDF
7. Turn the bulb socket
-quarter of a turn
pull it out. You can use
pliers to remove the bulb
socket if you are unable
to do it by hand.
8. Once the socket has
been removed, pull
the bulb straight out
to remove it from
9. Reverse the above steps to replace the
Windshield wiper blades should be inspected at least
twice a year for wear or cracking. See “Wiper Blade
Check” in Section 7 of this manual under Part B “Owner
Checks and Services” for more information.
Replacement blades come in different types and are
removed in different ways.
To replace the wiper blade assembly:
1. Position the wipers on the windshield in the “mid”
2. Lift the windshield wiper arm away from the
windshield. Note: The windshield wiper does not
have a locking upright position feature.