Filter
Top Products
87 | NAVISET ADMINISTRATOR 2 USER’S GUIDE
IR Remote Tab
If one or more devices selected supports sending IR Remote control commands, the IR Remote tab will be shown.
Sending IR Remote commands can be used to perform commands and access functions that may not be available via
the commands in the Commands tab, but are available on the device’s IR Remote control.
There are two types of remote controls, one for large-screen displays, and one for projectors. Select the appropriate
type for the device being controlled before adding any commands.
!Note: IR Remote Commands for the both display large-screen displays and projectors can not be used together in a task.
Click on the buttons in the simulated IR Remote to add them to the queue to be sent by the Task. Once buttons have
been added to the queue, the sequence they will be sent in can be rearranged or deleted using the queue arrangement
, , and buttons.
!Note: Not all displays support IR Remote commands, and not all supported displays support all if the IR controls shown. No
status or warning messages are displayed if a display does not support a particular IR Remote command.