Filter
Top Products
147 | NAVISET ADMINISTRATOR 2 USER’S GUIDE
Advanced Settings
The RS232 WMI Provider has several advanced settings for use in certain congurations and scenarios.
Create virtual instance for Monitor ID “All” if two or more displays are on a COM port
This setting allows commands to be simultaneously sent to all displays on a particular COM port by creating an
extra WMI object instance for a virtual display with Monitor ID “All”. All the displays on the COM port will respond to
operations on this instance.
!Note: This setting is intended for use with WMI scripts, and not the NaViSet Administrator 2 application. It should not be
selected when using the NaViSet Administrator 2 application.
Disable Factory Reset Command
This setting prevents the Monitor IDs assigned to each display from being reset by the Factory Reset command
being used. Resetting the Monitor IDs would require that each display be manually re-congured via the On Screen
Display.
Create instances even if no display monitor is detected
When this setting is selected, a WMI object instance will be created for each display congured in the WMI provider,
even if there is no response from a display. This can be useful when using WMI scripts, because it keeps the total
number and sequence of the WMI objects created constant.
!Note: This setting is intended for use with WMI scripts, and not the NaViSet Administrator 2 application. It should not be
selected when using the NaViSet Administrator 2 application.