Filter
Top Products
64 | NAVISET ADMINISTRATOR 2 USER’S GUIDE
SBC’s internal RS-232C connection.
3. The display must be congured to use RS-232C control unless the display model supports LAN
based daisy-chains (Models supporting LAN based daisy-chains have RS-232C IN, LAN1 and LAN2
connectors).
4. Do not use the DDC/CI WMI Provider with an SBC. The internal connection to the display supports
RS232 communications only.
5. If using the RS232 WMI Provider, see “Windows Computer on LAN connections via WMI” on page 48
for important information about conguring WMI.
Notes
1. Monitor ID does not have to be 1.
2. One IP address is required.
3. The SBC must be running Windows and be operational in order to communicate with display(s).
4. See Appendix A on page 137 for comparisons between the LAN to RS232 Bridge and RS232 WMI
Provider.