Filter
Top Products
117 | NAVISET ADMINISTRATOR 2 USER’S GUIDE
8. In the Start Schedule section, select the desired time and days on which to turn the displays on.
9. On the Summary tab review the Task settings, and click OK.
10. Next to easily congure the power off times, open the Task Library, select the task that was just created
and click Duplicate...
11. On the Settings tab edit the Task Name to indicate that this duplicated task is for power off.
12. On the Commands tab change the Power State command selection from On to Off.
13. On the Task Schedule tab select the desired Off time for the displays.
14. On the Summary tab review the Task settings, and click OK.
15. There will now be two new tasks listed in the Inactive Tasks list that will automatically run on the selected
days and times. The green background in the Next Start Time column indicates the tasks will run
automatically at the time indicated.