Filter
Top Products
129 | NAVISET ADMINISTRATOR 2 USER’S GUIDE
11. Click OK to add the new task listed in the Inactive Tasks list.
12. Duplicate and modify the task as necessary to create other Tile Matrix congurations, such as Tile Matrix
Off etc.
!Note: Depending on the changes being made to the Tile Matrix conguration of the displays, it may not be necessary for
some of the commands to be performed with each task. For example if the displays are being switched between a 2x2 tile
matrix, and individual displays (no tile matrix), then it is not necessary for example to send the Tile Matrix # H Monitors,
Tile Matrix # V Monitors, and Tile Matrix Position settings for each task. In this particular case, once the displays have been
initially congured, only the Tile Matrix Mode - Enable / Disable setting needs to be set to recongure the displays. This can
make the Task operation faster by reducing unnecessary commands.