Filter
Top Products
12 | NAVISET ADMINISTRATOR 2 USER’S GUIDE
Installing NaViSet Administrator
The NaViSet Administrator system includes the necessary remote software components to facilitate the various
connection methods to different devices. These components are included on the install media and are available from
the auto-run menu system, or by running the corresponding setup application directly.
NaViSet Administrator System
Local (Administrator) Computer
NaViSet Administrator
Application
Components for Remote Computers
RS232 WMI Provider
DDC/CI WMI Provider
LAN to RS232 Bridge
NaViSet Administrator application: The main application should be installed on the administrator’s computer, and
will store all of the conguration and information gathered from the various remote devices in a local database le.
Components for Remote Computers
LAN to RS232 Bridge: Is a utility that provides two-way communications via LAN to NEC large-screen displays or
projectors that are connected to the remote computer via an RS232 connection. See Appendix D on page 142 for
more information.
DDC/CI WMI Provider: Provides two-way communications with displays connected directly to a Windows computer.
See “Desktop display(s) connected to a Windows Computer” on page 46, and Appendix F on page 148 for more
information on WMI Providers. This installer can be run in silent mode using the command line setup /S.
RS232 WMI Provider: Provides an alternate method of two-way communications with NEC large-screen displays
connected to a Windows computer via an RS232 connection. See Appendix A on page 137 for a comparison of the
various connection methods for large-screen displays and the features and benets for each. See also Appendix E on
page 145 for information on conguring settings used by the RS232 WMI Provider.
!Note: Please see the README les included with each component for detailed information on the system requirements and
conguration settings.