Filter
Top Products
66 | NAVISET ADMINISTRATOR 2 USER’S GUIDE
NEC projector connected via Windows Computer to LAN
Conguration Overview
NEC projector connected to a Windows computer via RS-232C, and the computer is running the LAN to RS232 Bridge
utility.
Conguration Features
1. Shared LAN connection using one IP address.
2. Supports projector models without LAN interface.
Adding device(s) to NaViSet Administrator
Select device type NEC projector connected to LAN when adding devices.
Connection Diagram
Ethernet / RJ45 RS232
RS-232C
LAN to RS232 Bridge
LAN 2 RS232
COM
NaViSet Administrator
N
E
T
W
O
R
K
Note: Video connections not shown for clarity
Restrictions
1. Congure the Baud rate in the LAN to RS232 Bridge utility to match that of the projector. Available rates
are 9600, 19200, and 38400 baud.
2. Some projector models require the communications setting to be manually congured between RS232
and LAN via the On Screen Display. Select RS232 for this conguration.
3. Congure the RS232 COM Port in the LAN to RS232 Bridge utility to the COM port used on the
computer.
4. Computers running the LAN to RS232 Bridge utility are not able to provide network enumeration of the
connected projector. The projector can not be automatically identied on the network using the projector
Enumerate function in NaViSet Administrator. The IP address or hostname of each computer must
therefore be manually entered instead.
5. RS-232C cable must be crossover / NULL modem type.