Filter
Top Products
43 | NAVISET ADMINISTRATOR 2 USER’S GUIDE
Importing multiple NEC projectors
Multiple NEC projectors can be imported in the following different ways:
1. Automatic Network Enumeration of projectors on the network
2. Importing a list of IP addresses from a le
3. Specifying an IP address range
Add NEC projectors using Network Enumeration
Many models of NEC projectors that are connected directly to LAN are capable of being automatically identied. A
special identication message will be broadcast and list any projectors that responded. First select the network Interface
to be used to send the broadcast message on, then click the Enumerate button. Any projectors that were identied will
be added to the list below.
!Note: Projectors connected to a computer by RS232 and using the LAN to RS232 Bridge are not be able to be detected using
the Network Enumeration function. Not all projector models support the automatic network enumeration feature.